logo
Product Detail
Home Products Detail

Products

LUCE & LIGHT

UP/DOWN WALL LIGHT
OUTDOOR LIGHTING
INTONO 1.2

The new, chameleon-like wall-mounted fixture that blends in with the wall. The fixture’s body, whose dominant traits are minimalism and elegance, is a slender cylinder connected to the wall by a sinuous double curve. Suitable for outdoor installation on facades, this lamp is smart, enabled for sound and blends in.

Specification

Power
6W/6W
Color Temperature
3000K
Light Source Type
LED
Lumen Output
256LM/292LM
Finishing
CORTEN STEEL
IP Rating
IP65
Color Rendering
CRI 80
Driver
1-10V DRIVER

See more

LUCENT
PIN HOLE DOWNLIGHT
OUTDOOR LIGHTING

Pinhole90 fixed downlight with Ø34mm pinhole aperture and supplied with a separate installation kit with overlap flange for finished ceilings. Available in both white or black finish as standard. This product can accommodate a wide choice of LED light sources including our LED50 ONE family of modules, Xicato and retrofit MR16 & GU10 LED lamps.

ARTEMIDE
WALL LIGHT
OUTDOOR LIGHTING
Light fixture with 1 light beam using monochromatic LED light source caracterized by warm colour temperature (3000K) together with a light-diffusing lens which optimize the optical performance of the beam and establish its width. Designed to create geometric lights of scenic effect, it has 1 narrow beam of 15°. Wall installation. Composed by lighting cap unit and terminal board fixed together by means of locking dowels. Cap in die-cast EN AB-47100 aluminium. Terminal board in reinforced polymer. Watertight gasket in silicone rubber. Locking dowels used outside the fixture in AISI 316 stainless steel. PMMA lens siliconed flush with the cap to obtain the beam angle opening.
NEKO
RECESSED DOWNLIGHT
INDOOR LIGHTING
Square recessed downlight made of die-cast aluminium with white powder-coating finish (RAL 9016) and white reflector; ON-OFF Driver; LED 11W; measurement 71mm x 71mm; ceiling cutout of 75mm x 75mm with a trimless mounting; luminaire's weight is approximately 200g; rotation 355° and pivot max. 30°; CCT 3000K with an LED Output of 1100lm; high color rendering at an index of CRI90; after a lifetime of 50000h min. 80% of the luminous flux with energy efficient CITIZEN LED Chips; 5 years warranty; lighting perfectly suitable for reading, writing as well as computer and control work according to DIN EN 12464-1 (UGR<19); degree of housing protection according to DIN EN 60529 (IP20)
UNILAMP
SPOTLIGHT
OUTDOOR LIGHTING

DOT family is a range of small recessed wall luminaires with LED light sources. The glare-free cover enables DOT to be installed where comfortable illumination is required. Fitted with world renowned LED manufacturer DOT is highly efficient with low energy consumption. DOT is available in four different design with interchangeable front covers in both square and round shapes. The very small and shallow housing allow the installation of the fixtures in wall or step that have limited recessing depth. DOT is regularly used to illuminate stairways and pathways where directional low level light is preferred.

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form