logo
Product Detail
Home Products Detail

Products

L&E

LINEAR LIGHT
OUTDOOR LIGHTING
1LLF018-RGBWX-DM560-LLP4540K

Dimensions (W x H) 45 x 40mm, Flexible PCB LED with aluminium profile (Opal PC Diffuser)

Specification

Power
18W
Color Temperature
RGBW - 3000 K
Light Source Type
LED
Lumen Output
750LM/M
Finishing
ALUMINIUM
IP Rating
IP65
Color Rendering
Driver
DMX 512

See more

BEGA
FOOT LIGHT
OUTDOOR LIGHTING
Wall luminaire made of stainless steel with unshielded light for surface mounted installation. Installation possible in horizontal or vertical burning position.Luminaire made of aluminium and stainless steel. Front plate made of stainless steel. IP67/65,IK10. DIMENSION:(W)645x(H)125x(D)125mm.
LUCELIGHT
SURFACE MOUNTED LIGHT
OUTDOOR LIGHTING
Wall mounted for outdoor applications, single beam surface mounted (wall). Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006. Appliance class: class III. Energy efficiency class: F (light source) in accordance with EU 2019/2015 tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
NEKO
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING

Round recessed downlight made of die-cast aluminium with white powder-coating finish (RAL 9016) and white reflector; ON-OFF Driver; System Power 21W; measurement Ø85mm; ceiling cutout of Ø75mm with a narrow mounting trim; luminaire’s weight is approximately 300g; CCT 3000K with a System luminous flux of 1300lm; high color rendering at an index of CRI90; after a lifetime of 50000h min. 80% of the luminous flux with energy efficient CITIZEN LED Chips; 5 years warranty; narrow beam characteristic w

MEYER
INGROUND UPLIGHT
OUTDOOR LIGHTING

Housing of corrosion‑resistant die‑cast aluminum AlSi12, double polyester powder coated by high‑quality and UV‑stabilized coating process, Colour: black ral 7021, all exterior parts are stainless steel, tempered safety glass flush with frame, anti‑reflective coating from 1 side, dark screenprint, for loads up to max. 5000 kg (according to IEC / EN 60598‑2‑13), silicon gasket, cover and closure with 3 stainless steel screws, cable gland: M20, connecting terminal: 3 pole, highly efficient anodized rotationally symmetrical reflector, lockable, tilt range: 0‑15, 0,8 m cable H05RN‑F3G1, integral driver (AC/DC), CRI > 80, max 2 SCDM, service life L90/B10 > 50.000 h, Beam angle (fwhm): 13°, luminous flux: 124 lm, wattage: 3 W, delivered lumens 41 lm/W, protection type IP67, protection class I, impact resistance IK10, dimensions: Ø 135 mm, width 131 mm, weight 2.6 kg. The modular luminaire design makes the replacement of components possible. The product meets the demands of the applicable EU guidelines and product safety regulations and bears the CE mark.

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form