Product Detail | Bloxlimited

XAL

RECESSED DOWNLIGHT

INDOOR LIGHTING

SPADO 150_049-3123517O

Round recessed spotlight in die-cast aluminium; surface traffic white powder coated; with trim; suitable for ceiling thickness of 2-25 mm; installation without tools using snap spring closure; passive cooling of the LEDs through improved heat sink geometry; light colour 3000 K; ≤ 3 SDCM (initial MacAdam); CRI ≥ 80; min. 80% of luminous flux after 50000 operating hours; energy efficient LEDs with high CRI; reflector made of polycarbonate, polished chrome.

Specification

Power

27.5W

Color Temperature

3000K

Light Source Type

LED

Lumen Output

2950LM

Finishing

WHITE TRIM / CHROME REFLECTOR

IP Rating

IP44

Color Rendering

CRI 80

Driver

ON/OFF DRIVER

SPARK

ADJUSTABLE DOWNLIGHT

INDOOR LIGHTING

Recessed adjustable downlight made of aluminium housing with white powder coated finish. Inner reflector available in Silver, Chrome black, Mirror chrome and white color finish. Suitable for high ceiling shopping mall, hotel, office tower application.

LIGHTFORMS

RECESSED LINEAR LIGHT

INDOOR LIGHTING

GlowBeam Recessed is a recessed luminaire that once installed has the appearance of surfacemounted fixture. An acrylic light conveyor “blade” extends down from the ceiling plane to provide ambient illumination. The acrylic blade is available as either fully frosted (OPAQ) or translucent with the end- and bottom-sides frosted (TRANS). The luminaire is specifiable in four lengths ranging from 615-1215 mm.

LINEALIGHT

WALLWASHER

OUTDOOR LIGHTING

Single emission lines for outdoor application. The warm white LED light source is composed of 9 powerled LEDs. The device body is made of aluminium 6060 and features a anodised aluminum finish, processed by means of 20 µm anodizing; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP67; the total weight is of 5.5 kg. The total absorbed power is 51 W. The power supply cable is included and features a 0.17 m length. The device features protection class I and can be floor-mounted with an outer casing, code 99771 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.