Product Detail | Bloxlimited

XAL

SURFACE MOUNTED DOWNLIGHT

INDOOR LIGHTING

MOVE IN 32_ 063-8111518F 063-8821118 002-90742

Round spotlight element in aluminium; surface black powder coated; installation without tools in mounting set due to patented ball catch system; recessed light with wrap around edge; suitable for ceiling thickness of 2-25 mm; spotlight element height adjustable without tools: flush with the ceiling, or extended 25 mm or 35 mm; passive cooling of the LEDs through improved heat sink geometry; with COB (Chip on Board) technology for maximum efficiency; no appearance of multiple shadows

Specification

Power

11.7W

Color Temperature

3000K

Light Source Type

LED

Lumen Output

755LM

Finishing

BLACK

IP Rating

IP20

Color Rendering

CRI90

Driver

ON/OFF DRIVER

FAGERHULT

LINEAR LIGHT

INDOOR LIGHTING

Connection

The luminaire is equipped with an access hole for cabling on the top. Knock-out at start luminaires short end for surface mounted mains cable. The luminaire unit is equipped with a through-wiring cable (5x2.5 mm²) and a snap-in connection in each end-cap.

Design

Luminaire body in natural anodised extruded aluminium finish.

SPARK

ADJUSTABLE DOWNLIGHT

INDOOR LIGHTING

Recessed adjustable rectangular downlight, luminaire body made of aluminium housing with white powder coated finish. Black finish and Honeycomb accessory available upon request.

UFO LIGHTING

FIBRE OPTICS

OUTDOOR LIGHTING

Megolon S540 is a thermoplastic, halogen free cable sheathing compound which exhibits an excellent level of fire retardancy. This product is specifically aimed at designs of cables requiring a good degree of flexibility and the ability to meet the more stringent fire test specifications.Ferrules are supplied in brass as standard or in stainless steel for use outdoors or in damp areas.

SIMES

SPOTLIGHT

INDOOR LIGHTING

Aluminium die cast housing in EN AB-44100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. 2 mm thick front trim in Stainless Steel - Grade AISI 316L with 2,5 -3% molybdenum content, with high resistance against corrosion. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion.