Product Detail | Bloxlimited

ACCLAIM

SURFACE LINEAR LIGHT

OUTDOOR LIGHTING

APCAE-APCC

Adapt Cove is a low power, low cost, dimmable LED cove light. Featuring on board switching of multiple color temperatures of white, it allows for long linear runs of up to 80’ in series. It’s compact profle allows it to be placed in very tight spaces, and it can also be natively dimmed from 0-100% via 0-10V sink

Specification

Power

Color Temperature

3000K

Light Source Type

LED

Lumen Output

384LM

Finishing

WHITE

IP Rating

IP66

Color Rendering

CRI 90

Driver

ON/OFF DRIVER

LINEALIGHT

INGROUND UPLIGHT

OUTDOOR LIGHTING

Single emission uplights for outdoor application. The super warm LED light source with a flood light distribution is composed of 1 powerled LEDs with CCT of 2700 K and a CRI 80; the source luminous flux is 490 lm, with a 98.0 lm/W nominal luminous efficacy.

The device body is made of die-cast aluminium en ab - 46100 and features a black finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered. The ingress protection degree is IP68; the total weight is of 0.2 kg.

The total absorbed power is 5 W. The power supply cable is included and features a 1 m length.

The device features protection class III and can be floor-mounted with an outer casing, code 99650(for concrete or masonry).

Compliant with the EN 60598-1 standard and its specific provisions.

BEGA

RECESSED DOWNLIGHT

OUTDOOR LIGHTING

PRIMA Recessed ceiling downlight with connecting cable for installation into concrete ceilings or suspended ceilings both indoors and out. With symmetrical wide beam light distribution. Luminaire made of aluminium alloy, aluminium and stainless steel BEGA Unidure® coating technology Colour graphite or white Clear safety glass Reflector surface made of pure aluminium Luminaire housing with 2 fixing claws and guide screws

LINEALIGHT

RECESSED DOWNLIGHT

INDOOR LIGHTING

Single emission downlights for indoor application. The warm white LED light source with a extra wide flood light distribution is composed of 1 powerled LEDs. The device body is made of aluminium and features a white ral 9010 finish, processed by means of coating. The ingress protection degree is IP45; the total weight is of 0.070 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.12 m length. The device features protection class III and can be ceiling-mounted, with a 35 mm diameter hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.