logo
Product Detail
Home Products Detail

Products

WE-EF

INGROUND UPLIGHT
OUTDOOR LIGHTING
EVC340_185-7705

IP69. IK10+. Stainless steel construction including PCS hardware. Safety glass lens; max. load 5 tonnes. Luminaire can be driven over at low speed. Silicone rubber gasket. Factory-sealed termination chamber complete with cable gland and 0.5 m of flexible PVC free cable. Integral EC electronic converter. Advanced thermal management protects LEDs while optimising lumens output. Removable LED boards for upgrading. CAD-optimised optics for superior illumination and glare control. OLC One LED Concept. Luminaire installation blockout and sealable junction box included in supply.

Specification

Power
36W
Color Temperature
3000K
Light Source Type
24LEDS
Lumen Output
4044LM
Finishing
STAINLESS STEEL
IP Rating
IP69
Color Rendering
CRI 80
Driver
DALI DRIVER

See more

MARTIN
CONTROL SYSTEM
INDOOR LIGHTING

The Martin DMX/RDM ARTnet to DMX Interface translates Artnet protocol into DMX in/out universes. It can also be used as DMX Splitter Hub, Fail Safe device. As an extension for DMX License, it gives you 4 outputs of DMX universes.

LUMASCAPE
UNDERWATER LIGHT
OUTDOOR LIGHTING


LED LINEAR
INGROUND LINEAR LIGHT
OUTDOOR LIGHTING

24 V, IP67 protected and IK10 certified, linear LED luminaire for indoor and outdoor in-ground installation. Suitable for installation into roads and parking lots according to EN 60598-2-13. To be walked on and traversed by vehicles with air filled tires (including trucks used for delivery). Polyurethane encapsulation offering a premium water proof sealing (values), UV resistance (no coloration or increase of absorption) chemical stability against urban gazes and protection against abrasion. Stainless Steel V4A housing delivered with male/female IP67 connectors. Available either with an opal top layer or transluscent with an internal 10° and 30° lenses for wall grazing. Light source assembled using state of the art automated Reel-to-Reel (R2R) production process supporting LED Linear™ Tj Away thin flexible circuit board technology.

NEKO
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING

Round ceiling mounted downlight made of die-cast-aluminium with ON-OFF driver; white wet painting finish (RAL 9016) and white reflector; LED 18W; measurement Ø72mm; luminaire’s weight is approximately 700g; CCT 4000K with an System Output of 2050lm; decent color rendering at an index of CRI90; after a lifetime of 50000h min. 90% of the luminous flux with energy efficient BRIDGELUX LED Chips; 5 years warranty; medium beam characteristic with 50° beam angle; lighting perfectly suitable for reading

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form