Product Detail | Bloxlimited

LUCENT

SURFACE MOUNT ADJ LIGHT

INDOOR LIGHTING

SURFACE95 ACCENT FLARE-LED51/U_24°

The LED50 ONE Generation 2. Choice of 3 colour temperatures and 3 beam options. Designed to run at 350mA. Fully dimmable with an appropriate driver.

Specification

Power

14.8W

Color Temperature

3000K

Light Source Type

LED

Lumen Output

768LM

Finishing

WHITE

IP Rating

IP20

Color Rendering

CRI ≥98

Driver

ON/OFF DRIVER

IGUZZINI

SPOTLIGHT

INDOOR LIGHTING

Miniaturised adjustable spotlight for surface mounting with special base. The body is made of painted die-cast aluminium, with a passive dissipation system that ensures optimal thermal management. Rear cap and front ring in thermoplastic material (Mass-Balance). LED source with high colour rendering C.O.B (Chip on board) technology. The joint system allows a 360° rotation and a 90° inclination, offering flexibility in the orientation of the light beam.

TRAXON

WALLWASHER

OUTDOOR LIGHTING

The Allegro Linear AC SW family is a slim-profile, AC-line powered high-brightness luminaire. The family is controllable via DMX512, and is available in 1ft and 4ft lengths. The simplicity of the luminaire’s topology means it can be easily daisy-chained to form long runs. Remote Device Management (RDM) circuits are built into each luminaire that enables extensive control and monitoring of the entire lighting installation. DIMENSION : 1215 × 50 × 86mm

LINEALIGHT

UNDERWATER LIGHT

OUTDOOR LIGHTING

Single emission submerged for outdoor application. The natural white LED light source with a elliptic flood (20°÷29°) x (41°÷60°) light distribution is composed of 1 powerled LEDs with CCT of 4000 K and a CRI 80; the source luminous flux is 620 lm, with a 137.8 lm/W nominal luminous efficacy.

LINEALIGHT

WALLWASHER

OUTDOOR LIGHTING

Single emission lines for outdoor application. The warm white LED light source with a flood light distribution is composed of 9 powerled LEDs. The device body is made of aluminium 6060 and features a anodised black finish, processed by means of 15 µm anodizing; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP67; the total weight is of 2.8 kg. The power supply cable is included and features a 0.2 m length. The device features protection class I and can be floor-mounted with an outer casing, code 98672 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.

May 05, 2026

The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset

LUCENT

Specification

See more

Design Better Light, Anywhere

Recent News

LUCENT

Specification

See more

Design Better Light, Anywhere

Newsletter Subscribe

Recent News