logo
Product Detail
Home Products Detail

Products

SPARK

ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK1801_8W_24D
Recessed adjustable downlight, die cast aluminium housing body. Various choices on CCT, beam angle and inner reflector.

Specification

Power
8W
Color Temperature
3000K
Light Source Type
LED
Lumen Output
431LM
Finishing
WHITE
IP Rating
IP20
Color Rendering
CRI90
Driver
ON/OFF DRIVER

See more

TRAXON
WALLWASHER
OUTDOOR LIGHTING

The Allegro Linear AC DW family is a slim-profile, AC line powered high brightness luminaire. The family is controlled via DMX512 and is available in four length from 320mm to 1215mm with tunable white and various optics. The simplicity of the luminaire's topology means it can be easily daisychained to form long runs. Remote Device Management (RDM) circuits are built into each luminaire that enables extensive control and monitoring of the entire lighting installation. IP66, IK07. DIMENSION: 320(L)x50(W)x86(H)mm.

LED LINEAR
INGROUND LINEAR LIGHT
OUTDOOR LIGHTING

Robust in ground grazer made of V4A stainless steel available in standard lengths and 10° and 30° beam optic. Oceanos has an environmental resistance of IP67. This is made to the unique polyurethane encapsulation. Different optics enable adaptability to different projects. The 10° optic suit well for wall grazing, as the 30° and opal are suitable for accent lighting. Oceanos has an IK10 classification hence is very robust. The ability to withstand a pressure of 30kN is equivalent to being traversed by a vehicle according to DINEN605982.

PLATEK
INGROUND UPLIGHT
OUTDOOR LIGHTING

Outdoor inground uplight body and front locking trim in AISI 316L stainless steel. IP68 Degree of protection with Full Dry system which avoids condensation inside the product. The Installation of the recessed housing in cast concrete with a 20-30 cm gravel soak away. Only an IP68 connection to the power supply can guarantee the same protection to the fixture. IK08

MEYER
FLOODLIGHT
OUTDOOR LIGHTING

Housing made of corrosion‑resistant die‑cast aluminum AlSi12, polyester powder coated by high‑quality and UV‑stabilized coating process, Colour: black ral 7021, all exterior parts are stainless steel, tempered safety glass, anti‑reflective coating from 1 side, dark screenprint, silicon gasket, closure with 2 stainless steel screws, mounting bracket: 1 elongated hole Ø 7 mm, spacing 18 mm, 1 centre hole Ø 8.5 mm, tilt range: 180°, cable gland: M16,

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form