logo
Product Detail
Home Products Detail

Products

IGUZZINI

WALLWASHER
INDOOR LIGHTING
LASER BLADE_P194.47

Miniaturized recessed rectangular luminaire. LED lamps with different colour temperatures that allow them to be modulated. This variation is achieved by mixing the emission of 3 x 2700K high CRI LEDs and 2 x 5700K high CRI LEDs. Despite the disparity of the lamps when the two end channels are used - 2700K and 5700K - the intensity of the flux emitted is the same.

Specification

Power
17W
Color Temperature
TW - 2700K - 5000K
Light Source Type
LED
Lumen Output
332LM
Finishing
GREY / BLACK
IP Rating
IP20
Color Rendering
CRI 97
Driver
DALI DRIVER

See more

UFO LIGHTING
SURFACE TRACKLIGHT
INDOOR LIGHTING
ICONIC SX magnetic track spotlight made of aluminium housing. The fittings are polarity agnostic which means that the fittings can be placed on the track at any point in any direction. The Ionic includes global and local dimming, meaning each fitting can be dimmed on a track then all the fittings can be dimmed at once. This system offers full 360° rotation as well as 90° of tilt - so it can be pointed in almost any direction. There are three colour temperatures for all fittings and the Ionic spotlights have a variety of lens types, from narrow to wide angled, and all can be mixed and matched within the system.
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING

Single emission downlights for indoor application. The warm white LED light source with a medium flood light distribution is composed of 1 powerled LEDs with CCT of 3000 K and a CRI 80; the source luminous flux is 233 lm, with a 116.5 lm/W nominal luminous efficacy. The device body is made of brass and features a embossed white ral 9003 finish, processed by means of coating. The ingress protection degree is IP44.

IGUZZINI
RECESSED LINEAR LIGHT
OUTDOOR LIGHTING

Recessed ground / ceiling / wall luminaire made of aluminium housing with die-cast aluminium end caps complete with silicone seals. Installation in continuous lines of up to a max length of 10.5m for ground-recessed version. IP66,IK10. DIMENSION: 610x 87x104mm

ARTEMIDE
INGROUND FOOT LIGHT
OUTDOOR LIGHTING

Light fixture with high-performance LED light sources. Drive-over recessed floor installation with floorprotruding cap. All the versions are drive-over up to 5000Kg. Due to the low height of the cap, Megara 90 is also suitable for installation in walk-over areas, being careful to avoid areas of direct transit. Composed by body, cap, diffuser, recessing box. Body and cap in painted EN AB44100 aluminium, silicone gaskets; provided with 30 cm-long pre-resined three-pole connection cable. Electronic ballast integrated in the body. Diffuser in UV resistant polycarbonate.Power connection to the mains by means of the IP67 connector supplied with the light fixture, which can be housed in the recessing box and is suitable for cables with a diameter from 5 to13.3 mm. Fixing to the recessing box is ensured by means of anti-vandal screws TORX. Recessing box for laying in reinforced polymer to be ordered separately. Radial emission beam optic. White monochromatic LEDs available in 3 colour temperatures in AISI 316 stainless steel. Painted die-cast aluminium with 3-stage outdoor treatment. Technical features of light fixtures in compliance with EN60598-1 and part 2-13. IP Rating IP65-IP67.ENEC approved.Insulation class I.

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form