logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
WIBRE
UNDERWATER LIGHT
OUTDOOR LIGHTING
4.0195.90.02
Protection class IP68 – for a water depth of up to 3 m. Protection class IP69 - protection against high pressure and high jet water temperatures. Entirely made of stainless steel 316Ti. Mounting foot adjustable through 180° or 90°. POW-LED cold white, warm white, neutral white, 230 V. Cable gland PG13,5, marine grade 316Ti stainless steel. Temperature-resistant silicon seal. Toughened safety glass. Supplied with light source and 3 m of underwater cable
Compare
NEKO
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
M3-9303511F-NN

Downlight round made of die-cast aluminium with black powder-coating finish (RAL 9005); ONOFF Driver; LED 11W; measurement Ø50mm; luminaire’s weight is approximately 120g; CCT 3000K with an LED Output of 1100lm; high color rendering at an index of CRI90; after a lifetime of 50000h min. 80% of the luminous flux with energy efficient CITIZEN LED Chips; 5 years warranty; beam characteristic with 35° beam angle; lighting perfectly suitable for reading, writing as well as computer and control work ac

Compare
SPARK
TRACKLIGHT
INDOOR LIGHTING
T-LINE K3_CTLS-1250-30°x30°(TILT:0°)

LED Central linear light with twin wings tilting linear light system can be flexibly combined with track spotlights on the same track rail for general lighting & accent lighting. Ultra slim delicate design and flexible rotation for wall washing. It come in 3-wire, 4-wire and 6-wire surface / suspension track. Various of beam angle available.

Compare
SPARK
BOLLARD
OUTDOOR LIGHTING
SPK7008-24W

Outdoor Bollard luminaire made of die-cast aluminium housing and in powder coated black finish. Silicon rubber gasket and external driver. Suitable for garden, balconies terraces and walkway application. Luminaire come with 2m height. Various height available upon request such as 2.5m, 3m and 3.5m etc.

Compare
ELR
RECESSED DOWNLIGHT
INDOOR LIGHTING
ORION 2 TRIM_3000K-8W-40°

A series of minuscule pinhole downlight designed with extremely small aperture yet maintaining high light output ratio. Incorporating ELR’s signature modular concept design, LED modules are fully interchangeable with various choices to provide optimal illumination for all kinds of spaces.

Compare
XAL
CEILING LIGHT
OUTDOOR LIGHTING
SONO 260_871-91265170
Die-cast aluminium surface round ceiling light with white powder coated. Time saving installation through snap-in mounting system. LED board highly reflective lacquered for higher efficiency. Satin PMMA cover; luminaire with 2 cable openings and plug-in terminal for through wiring. IP54 (wall mounted) and IP50 (ceiling mounted). IK07 DIMENSION : D255MM * H82MM
Compare
WIBRE
UNDERWATER LIGHT
OUTDOOR LIGHTING
4.0050.30.12
Despite its small dimensions, the continuously swivelling miniature spotlight for illuminating small and medium-sized fountains and water features produces up to 675 lumens. Its robust stainless steel housing can withstand the effects of water even over many years. Also outside the water, where it can conjure up lighting effects on objects, the smallest spotlight in the Centum series offers limitless design possibilities with static or dynamic white light or with coloured light (RGB-W).
Compare
LUMASCAPE
SPIKE LIGHT
OUTDOOR LIGHTING
LS411COB 20W 830 WF 1
The LS411COB uses 'Chip on Board' technology to deliver powerful illumination and efficiency in one compact package. The high lumen density, combined with the traditional 'lamp and reflector' optics makes the LS411COB ideal for applications requiring wider distribution such as landscape lighting or other applications where sharp cutoff is not desired. Featuring a wide range of colour temperatures and optical / shielding combinations, the LS411COB retains the versatility of its discrete LED predecessor whilst dramatically boosting delivered lumens.
Compare
SPARK
TRACKLIGHT
INDOOR LIGHTING
SPK9003-35W-24°
Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Black finish and honeycomb accessory available upon request. It come with different types of bean angles.
Compare
IGUZZINI
RECESSED DOWNLIGHT
INDOOR LIGHTING
REFLEX_Q974

Recessed fixed round luminaire with rim. Reflector vacuum-metallised with aluminium vapours with an anti-scratch protective layer. Die-cast aluminium body and passive dissipation system. Product complete with LED lamp in warm white colour tone suitable to use on Indoor / Outdoor application. IP20 / IP54

Compare
LIGMAN
WALL LIGHT
INDOOR LIGHTING
NYB-30332-O-W30

Luminaire made of die-cast aluminium end-caps and extruded aluminium profile with powder coating. Single cable entry, stainless steel fasteners in grade 316. PMMA diffuser with Opal (UGR <19) and micro prismatic (UGR <13) options for better glare control. Up and down light distribution options. Passive thermal management, integral control gear. Wireless control available through Bluetooth connection. Daylight and occupancy sensor options. Emergency module (1 or 3 hours) is available upon request with 3 options (BASIC, SELF-TEST, PRODALI). IP20.

Compare
LIGHTFORMS
RECESSED DOWNLIGHT
INDOOR LIGHTING
LF157036
This ceiling recessed downlight has high lumen output capability. Available in various finishes and colour temperatures, this light fitting is perfect for retail, workplace and hospitality lighting schemes.
Compare
CDN LIGHTING
RECESSED DOWNLIGHT
INDOOR LIGHTING
HS6050 7W50D


Compare
LINEALIGHT
BOLLARD
OUTDOOR LIGHTING
BUZZER PRO_C00007BGWSR

Radial diffusion bollard & pole for outdoor application. The warm white LED light source with a asymmetric 180° light distribution is composed of 1 arrayled LEDs. The luminaire body is made of die-cast aluminium en ab - 46100 and features a grey ral 7021 finish, processed by means of open pore anodizing + powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP65, IK10.

Compare
FORMALIGHTING
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING
COBRA FLEX_G4010354-9030WWD010

Surface mounted modular system in extruded aluminium. Available in different length configurations based on a 54mm link (2 LED per link) with a 60mm increment. Section 28.5x30mm. Its flexible structure maintain a constant 30mm pitch between the LED. IP20

Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset