logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
FLOS
RECESSED DOWNLIGHT
INDOOR LIGHTING
LIGHT SHADOW PRO Ø 45 FIXED_05.2506.40
LED lighting module, with low glare, to be inserted in the recessed frames (not included), installation through a bayonet system with interchangeable spots. Remote driver not included. The ingress protection degree is IP20.
Compare
SPARK
RECESSED DOWNLIGHT
INDOOR LIGHTING
SPK3101_30W_55D

Recessed fixed downlight made of aluminium housing with white powder coated finish. Inner reflector available in Silver, Chrome black, Mirror chrome and white color finish. Cut-out Ø130mm.

Compare
FORMALIGHTING
SURFACE TRACKLIGHT
INDOOR LIGHTING
MOTO-ZERO130 M619IB28

Track-mounted spotlight with cast aluminum light head and control gearbox.

Moto-Zero 130mm. Three-phase Eurotype track adapter is included with the fixtures.

Two DC motors drive the fixtures, tilting them vertically up to 90° in two directions and rotating them horizontally 350°.

In Moto-Zero 66 Zoom, a third motor controls a lens that shapes the light beam from narrow to wide.

The movements and the beam shaping of the fixture, as well as the intensity

Compare
SPARK
SURFACE TRACKLIGHT
INDOOR LIGHTING
SPK9411-15W-15D

Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Reflector finish available White, Silver and Black Chrome. Black finish and honeycomb accessory available upon request.

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
MODOC_R_C00582WHMFL_2700K-27°
Single emission recessed downlights for indoor application. The warm white LED light source with a flood light distribution is composed of 1 arrayled LEDs. The luminaire body is made of technopolymer and features a white finish; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP20.
Compare
MEYER
FLOODLIGHT
OUTDOOR LIGHTING
8 261 046 029

Monocube are floodlights with very compact dimensions and minimalist design that blend discretely into the architecture. The luminaire housings have a smooth surface and are therefore easy to clean and to maintain. Optical film is available as an accessory in order to adapt the light distributions to the exact requirements of a lighting project. Monocube floodlights feature integral LED drivers and can be easily connected to mains voltage power supply. The sizes 3 and 4 can be equipped with Casambi ready drivers and be dimmed via Bluetooth Low Energy technology.

Compare
MEYER
POLE LIGHT
OUTDOOR LIGHTING
8 264 246 059

Housing made of corrosion‑resistant die‑cast aluminum AlSi12, polyester powder coated by high‑quality and UV‑stabilized coating process, Colour: black ral 7021, all exterior parts are stainless steel, tempered safety glass, anti‑reflective coating from 1 side, dark screenprint, silicon gasket, closure with 4 stainless steel screws, for installation on poles Ø 60 ‑ 100 mm, tiltable base made of powder coated aluminum, 2 drilled holes Ø 9 mm, spacing 95 mm, 1 centre hole Ø 13.5 mm, tilt range: 90°, 360° adjustable, cable gland: M20, connecting terminal: 3 pole, precise PMMA optics, integral driver (AC/DC), DIMENSIONS: (L×H×W): 152 × 120 × 152 mm.

Compare
SPARK
TRACKLIGHT
INDOOR LIGHTING
SPK7913-T1_3000K-8W-24°
Surface mount track spotlight made of die cast aluminium housing and come with different diameter such as Ø55, Ø65, Ø70 and Ø75mm. Wattage from low 6W to 35W max. Fixture finishing available in Black or White color. Wide bean angles are avaiable. IP20
Compare
LUCE & LIGHT
SPOTLIGHT
OUTDOOR LIGHTING
GINKO 4.3_20W-20°

Ginko 4.3 Outdoor surface mounted projector light (ceiling, wall, ground, spike), housing made of,body in anticorodal aluminium, AISI 316L stainless steel bracket made entirely on a CNC lathe. Bracket in AISI 316L stainless steel, tumble finished and painted (painted version), body made of brass, produced entirely on a CNC lathe. Bracket made of brass.  Optics available20°, 34°, 61°, adjustable 32°x73°. IP66, IK08.

Compare
PLATEK
SPOTLIGHT
OUTDOOR LIGHTING
RAYGUN 35 STS 843201S

IP65 Spotlight body, bracket and closure flange made of AISI 316L stainless steel with pickling and passivation treatment. With the addition of SurfShield a special scratch-resistant finish treatment that ensures increased resistance of the steel to chemical and atmospheric aggressions. Provided with surge protection electronics and protection against polarity reversal during wiring. Supplied with 5M of cable to powered a 24V CV transformer to be wired in parallel. IP65/IP68, IK08

Compare
ARTEMIDE
WALL LIGHT
OUTDOOR LIGHTING
T42112NW20
Light fixture with 1 light beam using monochromatic LED light source caracterized by warm colour temperature (3000K) together with a light-diffusing lens which optimize the optical performance of the beam and establish its width. Designed to create geometric lights of scenic effect, it has 1 narrow beam of 15°. Wall installation. Composed by lighting cap unit and terminal board fixed together by means of locking dowels. Cap in die-cast EN AB-47100 aluminium. Terminal board in reinforced polymer. Watertight gasket in silicone rubber. Locking dowels used outside the fixture in AISI 316 stainless steel. PMMA lens siliconed flush with the cap to obtain the beam angle opening.
Compare
LUCI
LED LIGHT BAR
INDOOR LIGHTING
LSXK-1451-L30-DF-1-4
The square cross-section silux K emits light from the diffused cover, 12 mm on the top and 3mm on both sides, so the light shines to the corners of the fixtures. 12×16mm homogeneous square section rigid light 3 different power consumption options to support energy saving project requirement With various length types and accessories ideal for various applications such as recessed mount, shelf and cove light.
Compare
XAL
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SASSO 60 ADJ_048-2622917M 048-2696318 002-90790

Round recessed spotlight in die-cast aluminium; 1 lamp; surface traffic white; 360° rotatable and 30° tiltable; installation without tools in mounting set due to patented ball catch system; round installation housing; with trim jet black; suitable for ceiling thickness of 2-25 mm; passive cooling of the LEDs through improved heat sink geometry; with COB (Chip on Board) technology for maximum efficiency; no appearance of multiple shadows.

Compare
PHOS
RECESSED DOWNLIGHT
INDOOR LIGHTING
MX-EE-MTF_ 2700K11W-30°

The Maxi Eclipse Mini Trim is a fixed, recessed downlight with a Ø120mm bezel and features a beautifully sculpted anti-glare baffle. The Maxi Is a high output downlight while still maintaining a surprisingly compact form.Easily interchangeable optics. Flawless finishes available on all components. Part of a wide family range of fully modular luminaires.

Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK3011-35W-15°

Recessed adjustable type downlight, aluminium housing, different types of beam angle.

Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset