logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
BEGA
UP/DOWN WALL LIGHT
OUTDOOR LIGHTING
24536K3
Wall luminaire with two-sided light output. For illumination and design tasks in architecture. The light directed downwards is intended to illuminate the wall and the horizontal surface in front of it. The light directed upwards is intended to illuminate the wall and ceiling surfaces. Luminaire made of aluminium alloy, aluminium and stainless steel. IP65,IK05.
Compare
CDN LIGHTING
RECESSED DOWNLIGHT
INDOOR LIGHTING
HS6055LR 7W15D


Compare
ARTEMIDE
TRACKLIGHT
INDOOR LIGHTING
FU11204APP
Funivia is a functional network of relationships, material and immaterial, free and inclusive capable of evolving through the cooperation of its elements. It starts from the essential, with a "mountaineer's" spirit it discovers a new level of freedom of light in spaces. A rope, the cable that carries energy, and nails, the fastening elements in space, are the basis for going far, overcoming the limits given by the rigidity of systems. The cable, with a special minimal cross-section but capable of supporting both mechanical and thermal stresses, is the energy distribution channel of the system and the load-bearing element on which the light elements are connected, it runs seamlessly in space transcending the limits of three dimensions. It is attached to the side, floor or ceiling through mechanical elements. It runs inside them without requiring to be cut and thus interrupted, drawing in space a network of regular lines, horizontal or vertical, but also freely inclined. From a single power point it can run indefinitely, the only limit being the power installed on its length. Funivia is not bound to a power grid or a predefined design, it can enter any space at any time and draw light with the utmost freedom, it can generate an extraordinary performance quality even without an ad hoc installation a specific intervention in the space. The light elements hook on the cable thanks to a "bridge" element, a kind of current-stealing lock that mechanically fixes the luminaire and takes energy from the cable. Also in this digital network each luminaire has its own identity, its own IP address, through which it can be managed with Dali systems or with Artemide App It is a sustainable approach at the level of production, distribution, installation, consumption, use, integration of elements that already exist without necessarily calling for the creation of new additional products. Funivia breaks a pattern common to existing lighting systems, breaking out of the rigidity of fixed modules (in space, stock, production).
Compare
LINEALIGHT
LINEAR DOWNLIGHT
INDOOR LIGHTING
82941W07
Single emission downlights for indoor application. The warm white LED light source with a asymmetric wallwasher light distribution is composed of 6 powerled LEDs. The device body is made of iron and features a white + black finish, processed by means of powder coating; the diffuser is made of ABS. The ingress protection degree is IP20; the total weight is of 0.51 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.11 m length. The device features protection class III and can be ceiling-mounted, with a 219 x 40 mm hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
LINEALIGHT
WALLWASHER
OUTDOOR LIGHTING
82711W07
Single emission lines for outdoor application. The warm white LED light source with a asymmetric wallwasher light distribution is composed of 3 powerled LEDs. The device body is made of aluminium 6060 and features a anodised aluminum finish, processed by means of 20 µm anodizing; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP68; the total weight is of 0.450 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.250 m length. The device features protection class III and can be floor-mounted with an outer casing, code 99972 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
XAL
SUSPENDED LINEAR LIGHT
INDOOR LIGHTING
MINO 60 direct / indirect

Luminaire housing from extruded aluminium profi le, angular design; direct / indirect light distribution; no visible screws; designed for continuous lighting systems; surface powder coated; pendant fi tting with cable suspension; with integrated tool-less suspension height adjustment; spring clip attachment to the luminaire. Length 1756 mm | width 60 mm | height 80 mm.

Compare
BEGA
BOLLARD
OUTDOOR LIGHTING
88061K3

Shielded bollard made of stainless steel with rotationally symmetrical light distribution. For the illumination of walkways, entrances and access roads. The light of the LED is directed by a reflector onto a conical reflector. Illumination on the illuminated surface is rotationally symmetrical, broad spread and uniform. Luminaire made of stainless steel, IP65.

Compare
ZICO LIGHTING
LED BULB
DECORATIVE LIGHTING
CLEAR GLS A60

Decorative, ultra dimmable LED filament light bulb with flicker-free technology and 25,000 hours lifetime. This lamp uses 8 watts of power to produce 780 lumens at a CRI 95.

Compare
FLOS
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
EASY KAP Ø80_03.4153.GL

Recessed luminaire with LED light source. Power supply not included. Installation frame not necessary. The ingress pritection degree is IP20.

Compare
IGUZZINI
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
LASER_P365

Round recessed luminaire with contact frame. Adjustable version that rotates internally by 355° and tilts by a maximum of 30°. The swivel unit rotates in a set back position in relation to the surface of the ceiling in order to guarantee precise, comfortable light diffusion and reduce direct glare significantly. The swivel unit body is made of die-cast aluminium with a radiant surface that guarantees optimum heat dissipation. Metallised, thermoplastic, high definition reflector - flood optic .

Compare
NEKO
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
TA5+M4-9273509A-TA5-WW

Round recessed mounted downlight made of die-cast aluminium with white powder-coating finish (RAL 9016) and white reflector; 0-10V Dim Driver; LED 9W; measurement Ø85mm; ceiling cutout of Ø75mm with a narrow mounting trim; luminaire’s weight is approximately 300g; rotation 355° and pivot max. 30°; CCT 2700K with an LED Output of 900lm; high color rendering at an index of CRI90; after a lifetime of 50000h min. 80% of the luminous flux with energy efficient CITIZEN LED Chips; 5 years warranty; bea

Compare
FLOS
RECESSED DOWNLIGHT
INDOOR LIGHTING
BON JOUR Ø 90 DALI_03.2003.14.DA
Embedded luminaire for LED light source. Remote 220/240V power supply included.Pre-installation frame must be ordered separately. The ingress protection drgree is IP20.
Compare
TRAXON
WALLWASHER
OUTDOOR LIGHTING
ALLEGRO LINEAR AC SW_1200

The Allegro Linear AC SW family is a slim-profile, AC-line powered high-brightness luminaire. The family is controllable via DMX512, and is available in 1ft and 4ft lengths. The simplicity of the luminaire’s topology means it can be easily daisy-chained to form long runs. Remote Device Management (RDM) circuits are built into each luminaire that enables extensive control and monitoring of the entire lighting installation. DIMENSION : 1215 × 50 × 86mm

Compare
XAL
SUSPENDED LINEAR LIGHT
INDOOR LIGHTING
TASK 900_059-0463038P
Round luminaire housing in aluminium; extremely flat design (only 15mm); modern shape in an elegant design for high demands; surface black powder coated; suspended luminaire with adjustable pendant rod mounting (chrome) 1000mm, feed in rod; direct light distribution through LGP body (Light Guiding Prism); side coupled light directed downwards by laser engraving; light control via highly reflective reflector material; indirect light component with special PCBs for increased luminous flux and maximum ceiling illumination; microprismatic PMMA cover; completely homogeneous illumination; same light density for all surface lights with the same components.
Compare
SPARK
TRACKLIGHT
INDOOR LIGHTING
SPK8161-T19_3000K-8W-36°
Surface mount track spotlight made of die cast aluminium housing and come with different diameter such as Ø55, Ø65, Ø70 and Ø75mm. Wattage from low 6W to 35W max. Fixture finishing available in Black or White color. Wide bean angles are avaiable. IP20
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form