logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
LUCI
LED NEON TUBE
INDOOR LIGHTING
LFUAY-T1000WB-L30-DF-I-15

Side bend dot-free flexible light, cuttable every 50mm at site. Updated with low wattage high lumen LED series. Available 4 different wattage variations. Indoor usage only, custom length max.5m per roll, connectable 10m per circuit


Compare
LINEALIGHT
CEILING LIGHT
INDOOR LIGHTING
65427W00
Single emission ceiling lights for indoor application. The warm white LED light source with a diffused light distribution is composed of 210 topled LEDs. The device body is made of aluminium 6060 and features a embossed black ral 9005 finish, processed by means of powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP40; the total weight is of 4.3 kg. The power supply driver is not provided and is to be ordered separately. The device features protection class III and can be ceiling-mounted, with a 912 mm diameter hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
LIGMAN
WALL LIGHT
INDOOR LIGHTING
NYB-30022-O-W30

Luminaire made of die-cast aluminium end-caps and extruded aluminium profile with powder coating. Single cable entry, stainless steel fasteners in grade 316. PMMA diffuser with Opal (UGR <19) and micro prismatic (UGR <13) options for better glare control. Up and down light distribution options. Passive thermal management and integral control gear. Wireless control available through Bluetooth connection. Daylight and occupancy sensor options. Emergency module (1 or 3 hours) is available upon request with 3 options (BASIC, SELF-TEST, PRODALI). IP20.

Compare
PLATEK
INGROUND UPLIGHT
OUTDOOR LIGHTING
TETRA 36 IN-GROUND 8496217

In-ground luminaire made of aluminium alloy body. Locking flange in AISI 316L stainless steel. A4 Stainless steel screws. Subjected to galvanic anodizing treatment divided into distinct phases: mechanical satin finishing, surface degreasing, anodic oxidation and final sealing. Installation of the recessed housing is cast concrete with a 20-30cm gravel soakaway. IP67, IK10

Compare
SPARK
LINEAR DOWNLIGHT
INDOOR LIGHTING
SPK1611_10W_36D

Recessed slim linear light made of die cast aluminium housing. Various of color temperature from 2700K to 4000K and beam angle from 15° to 60°. Suitable for Indoor application retail shop and office space.

Compare
SIMES
INGROUND LINEAR LIGHT
OUTDOOR LIGHTING
S.5402W
Minilinear: "Copper Free" Aluminium extruded EN AW-6060 with high resistance against corrosion, caps in "Copper Free" Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Miniround: "Copper Free" Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets (Minilinear). Painting Process: 3 Step Process 1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09 Maximum load capacity 500 Kg. This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user. This product contains a light source of energy efficiency class: E. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.
Compare
LINEALIGHT
UP/DOWN WALL LIGHT
OUTDOOR LIGHTING
81181W30
Single emission uplights for outdoor application. The warm white LED light source is composed of 1 powerled LEDs. The device body is made of die-cast aluminium en ab - 46100 and features a black finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered. The ingress protection degree is IP68; the total weight is of 0.2 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 1 m length. The device features protection class III and can be floor-mounted with an outer casing, code 99855 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
LUCENT
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING
SURFACE95 FIXED FLARE-LED51/U_55°
The NEW Surface95 tubular luminaire. Incorporates our Flare90 Fixed downlight installed with remote driver. Available with our own LED50 ONE GEN2 and LED50 ONE ULTRA.
Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
82075W60
Single emission downlights for indoor application. The warm white LED light source with a wide flood light distribution is composed of 1 powerled LEDs. The device body is made of aluminium 6026 and features a chalk white finish, processed by means of powder coating. The ingress protection degree is IP20; the total weight is of 0.13 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0,17 m length. The device features protection class III and can be ceiling-mounted with an outer casing, code 98502 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
CUSTOMIZED
TABLE LAMP
OUTDOOR LIGHTING
LANTERN WITH CLEAR GLASS

Decorative Outdoor table top or hanging light illuminate your back porch, deck or living room with a warm and inviting glow. The unique color and shape of these lanterns add a stylish detail to any room providing a touch of elegance and sophistication. Suitable for Indoor or Outdoor application.

Compare
LUCI
LED STRIP
INDOOR LIGHTING
LSXWY-1010W-L30-DF-I-15

Updated with low wattage high lumen LED series Available 5 different wattage variations Customisable every 50mm increment up to 1.4M Homogeneous rigid light with a square shape Ideal for shelf/cove light and recessed direct view light on ceiling/wall

Compare
FLOS
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
UT DOWNLIGHT TRIM Ø 86_09.4912.30A
Embedded luminaire for LED light source. Remote 220/240V power supply included.Pre-installation frame must be ordered separately. The ingress protection drgree is IP20.
Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
QUANTUM_R_90562M30

Single emission downlights for indoor application. The super warm LED light source with a flood light distribution is composed of 1 powerled LEDs with CCT of 2700 K and a CRI 80; the source luminous flux is 1108 lm, with a 110.8 lm/W nominal luminous efficacy. The device body is made of die-cast aluminium en ab - 46100 and features a embossed white ral 9003 finish, processed by means of powder coating; the diffuser is made of uvresistant polycarbonate. The ingress protection degree is IP44.

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
91414W30
Single emission downlights for indoor application. The warm white LED light source with a medium flood light distribution is composed of 1 arrayled LEDs. The device body is made of PC, processed by means of coating. The ingress protection degree is IP20; the total weight is of 1.9 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.3 m length. The device features protection class III and can be ceiling-mounted, with a 236 mm diameter hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
BEGA
WALL LIGHT
OUTDOOR LIGHTING
24724K3
Wall luminaire with single-sided light output for illumination and design tasks in architecture. The luminaire can be installed with the light distribution opening upwards or downwards. Luminaire made of aluminium alloy, aluminium and stainless steel. IP65, IK07.
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset