logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
XAL
UP/DOWN WALL LIGHT
INDOOR LIGHTING
SASSO 60_048-31604111O

Cylindrical wall surface mounted luminaire made of aluminium housing and available in 2 sizes. Symmetric direct or direct/indirect light distribution. Homogeneous wall or ceiling illumination through uniform light distribution; precise radiation characteristic due to high quality lens system. COB (Chip on Board) technology for maximum efficiency; no multiple shadows; efficient LEDs with very good colour rendering. DIMENSION : L84MM * W68MM * H166MM

Compare
XAL
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SASSO 100 ADJ_048-2720011F 048-2796317 002-90789

Round recessed spotlight in die-cast aluminium; 1 lamp; surface black; 360° rotatable and 30° tiltable; installation without tools in mounting set due to patented ball catch system; round installation housing; with trim Signal white; for installation in soft acoustic ceilings; suitable for ceiling thickness of 25-40 mm; passive cooling of the LEDs through improved heat sink geometry; with COB.

Compare
IGUZZINI
RECESSED DOWNLIGHT
INDOOR LIGHTING
LASER P318

Flush mount installation on false ceilings of thickness 12.5 to 25 mm for Minimal versions (without perimeter flap) or 1 to 25 mm for Frame versions (with flap) using steel wire springs. Frame and heat sink in die-cast aluminium. Reflector in metallic-finish thermoplastic material with scratch protection for excellent lighting efficiency and visual comfort. Controlled luminance emissions, UGR<13 comfort and UGR<10 super comfort versions. Available with on-off wiring and dimmable versions. The minimum installation space dimensions are listed in the instruction catalogue.


Compare
LOUIS POULSEN
POLE LIGHT
OUTDOOR LIGHTING
HOMANN PARK-5747308138
The fixture provides direct downward illumination and is self-illuminating. The fixture is available in two variants; an uplight and a no uplight version. Light distribution round symmetrical (T5) or asymmetrical (T3). It emphasizes theshape of the luminaire and creates ambience and comfort. DIMENSION: Width x Height x Length (mm) | 392 x 100 x 567mm.
Compare
IGUZZINI
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
Laser adjustable_P356.43


Compare
IGUZZINI
RECESSED DOWNLIGHT
INDOOR LIGHTING
LASER_P315

Round recessed luminaire with contact frame. Adjustable version that tilts by a maximum of 30°. The main swivel body is made of die-cast aluminium with a radiant surface that guarantees optimum heat dissipation. Metallised, thermoplastic, high definition reflector - medium optic. Structure with die-cast aluminium external contact frame with a single white finish. Steel rotating parts. The ring inside the swivel body is made of thermoplastic available in a range of painted and metallised finishes

Compare
XAL
LINEAR DOWNLIGHT
INDOOR LIGHTING
UNICO L4 BASIC_090-7L451E0B21 090-7L4020B

Rectangular recessed multi-downlight made of die-cast aluminium; installation without tools in mounting set due to patented ball catch system; rectangular installation housing; with trim jet black; suitable for ceiling thickness of 2-25 mm; equipped with four medium square light elements; symmetrical light distribution with precise radiation characteristic, beam angle 32°; high quality reflector with micro-faceted, aluminum-vaporised surface; black reflector.

Compare
XAL
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SASSO 40 ADJ_048-2820417S 048-2896317 002-90753

Round recessed spotlight made of die-cast aluminium housing, 360° rotatable and 30° tiltable. Suitable for ceiling thickness of 2-25 mm, passive cooling of the LEDs through improved heat sink geometry with COB (Chip on Board) technology for maximum efficiency. IP40

Compare
LEYARD
LED CURTAIN SCREEN
OUTDOOR LIGHTING
Zebra SMD-20

Zebra Series: Application environment : Outdoor ·Working life : ≥100,000 hours ·Cabinet material : Aluminum alloy ·Brightness : 1000 ~ 5000cd / ㎡ ·Installation method : Hoisting / Fixing ·Certification : CE / CCC / FCC

Can be customized size and shaped.

Pixel Pitch (H/V): 20mm, Pixel Configuration （SIDE):1 x SMD2727, Brightness（CD/m²):1000 ~ 7000, Pixel Density（dot/m²):2500, Transparency: 60%, Cabinet Resolution（dot): 50x50, Module Size（mm): 1000 x 28, Module Resolution: 50 x 2 dot, Cabinet Weight: ≤16Kg / m², Ingress Protection (Front/Back): IP65, Viewing Angle (H/V), 120°/ 120°, Viewing Distance:>20m, Gray Scale: 16 bits, Avg.Power Consumption（W/m²): 600, Refresh Rate（Hz): 3840, Input Voltage: AC100 ~ 240V , 50 / 60 Hz, Drive Mode: Static, Control Mode:  Synchronous display with control PC by DVI, Support Input: Composite , S-Vido , Component , VGA , DVI , HDMI , HD_SDI, Operating Temperature:  -40°C ~ 50°C（work), - 40°C ~ 60°C（store), Operating Humidity: 35% ~ 85%（work), 10% ~ 90% （store）

Compare
LINEALIGHT
UNDERWATER LIGHT
OUTDOOR LIGHTING
NAUTILUS_RF_84038W40

Single emission submerged for outdoor application. The warm white LED light source with a medium wide flood light distribution is composed of 9 powerled LEDs. The luminaire body is made of stainless steel and features a steel finish; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP68, IK10.

Compare
IGUZZINI
RECESSED DOWNLIGHT
INDOOR LIGHTING
LASER BLADE_RA22.43

Round recessed luminaire with contact frame. Fixed Super Comfort version: the LEDs are set a long way back to minimize glare and guarantee a high level of visual comfort. The main body is made of die-cast aluminium with a radiant surface that guarantees optimum heat dissipation. Metallised, thermoplastic, high definition reflector - wideflood optic. Structure with die-cast aluminium external contact frame with a single white finish. 

Compare
FLOS
RECESSED LINEAR LIGHT
INDOOR LIGHTING
INFINITY 35 RECESSED_N35N113G30B
LED modular system for recessed No Trim installation, including LED luminaires, aluminum installation profile and diffusers. Drivers included in lighting modules for 220-240V connection to mains or to other lighting modules. DIMENSION : L1125*W35*H120MM
Compare
FORMALIGHTING
SURFACE MOUNTED LIGHT
INDOOR LIGHTING
G4450035-9730OD0070
The new Canali edge is a revolutionary edge-less lighting system featuring easy and clean installation, eliminating wired connections and gearboxes in the cove. Canali Edge profile features easy-to-clip on adjustable spotlights, together with a dedicated channel for linear cove lights fixed by magnets, all in extruded aluminum. The Integrated 3 phase track system with DALI bus enables full DALI control on both linear and track spots. Small and powerful in-track integrated drivers make it very easy to move and reposition the spotlights and the linear lights.
Compare
SPARK
RECESSED DOWNLIGHT
INDOOR LIGHTING
SPK8240-T1-40W-26°

Recessed fixed downlight made of aluminium housing with white powder coated finish. Inner reflector available in mirror chrome, white and black color. Cut-out Ø150mm. For indoor use. IP20.

Compare
LINEALIGHT
PROJECTOR LIGHT
OUTDOOR LIGHTING
84532M60

Single emission projectors for outdoor application. The super warm white LED light source with a wide flood light distribution is composed of 1 arrayled LEDs with CCT of 2700 K and a CRI 80; the source luminous flux is 3424 lm, with a 148.9 lm/W nominal luminous efficacy.The device body is made of die-cast aluminium en ab - 46100 and features a white finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP66; the total weight is of 2.084 kg.The total absorbed power is 26 W. The power supply cable is included and features a 1 m length.The device features protection class I and can be wall lights, ceiling or floor-mounted.Compliant with the EN 60598-1 standard and its specific provisions.

Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset