logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
SPARK
BOLLARD
OUTDOOR LIGHTING
SPK_B4044A

Outdoor Bollard luminaire made of die-cast aluminium housing and in powder coated black finish. Silicon rubber gasket and external driver. Suitable for garden, balconies terraces and walkway application.

Compare
BEGA
FOOT LIGHT
OUTDOOR LIGHTING
33158K3
Recessed location luminaire for installation in walls or stairs. Installation possible in horizontal or vertical burning position. Luminaire made of aluminium alloy, aluminium and stainless steel. IP65,IK06. DIMENSION: (W)520x(H)125x(D)90mm.
Compare
MEYER
POLE LIGHT
OUTDOOR LIGHTING
8 903 246 059
Monospot pole luminaires in sizes 3 and 4 can be equipped with a Zhaga 18 connection socket. To this standardised interface, communication nodes for wireless control and monitoring are connected. Switch-on and switch-off times can be scheduled and light levels can be controlled flexibly via remote access. In addition, the status of each luminaire is monitored in real-time. Operators of public lighting systems benefit from efficient and cost-effective maintenance. The luminaires have integral DALI drivers with D4i standard.
Compare
LINEALIGHT
CEILING LIGHT
INDOOR LIGHTING
82942W07
Single emission downlights for indoor application. The warm white LED light source with a asymmetric wallwasher light distribution is composed of 12 powerled LEDs with CCT of 3000 K and a CRI 92; the source luminous flux is 3917 lm, with a 120.5 lm/W nominal luminous efficacy. The device body is made of iron and features a white + black finish, processed by means of powder coating; the diffuser is made of ABS. The ingress protection degree is IP20; the total weight is of 1 kg. The power supply driver is not provided and is to be ordered separately. The total absorbed power is 32.5 W. The power supply cable is included and features a 0.11 m length. The device features protection class III and can be ceiling-mounted, with a 432 x 42 mm hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
FLOS
ADJUSTABLE DOWNLIGHT
OUTDOOR LIGHTING
EASY KAP 50 ADJ_05.7212.B1

Recessed luminaire with LED light source. Power supply not included. Installation frame not necessary.

Compare
TRAXON
LINEAR LIGHT
OUTDOOR LIGHTING
Allegro Media Tube Lite RGBW 115x170

Allegro Media Tube® Lite fits into any wall, façade or media lighting application with tight installation requirements, while the wide beam angle output and 10-pixels-per-meter ensures a smooth illumination experience. Featuring auto addressing and quick lock connectivity, this greatly simplifies the lighting installation for building façades, media applications, bridges and more.This product is intended for use in high-quality colored light applications.

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
LORO_R_97695M30

Single emission downlights for indoor application. The super warm LED light source with a flood light distribution is composed of 1 arrayled LEDs with CCT of 2700 K and a CRI 80; the source luminous flux is 1088 lm, with a 136.0 lm/W nominal luminous efficacy. The device body is made of die-cast aluminium en ab - 46100 and features a embossed white ral 9003 finish, processed by means of powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP44.

Compare
IGUZZINI
SPOTLIGHT
OUTDOOR LIGHTING
Platea Pro - P813 - 55.4W

Outdoor luminaire with a Wide Flood optic, designed to use LED lamps. Made up of an optical assembly with a base and an aluminium alloy frame. The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. With a 5 mm thick colourless transparent tempered sodium-calcium glass cover. . Horizontal aiming is performed using the slots in the base, which allow an ±30° adjustment.Size (mm): 406x276

Compare
EWO
POLE LIGHT
OUTDOOR LIGHTING
CN500_AP07-26W
CN500 Outdoor Pole light made of die-cast aluminium material and polyester powder coating finish. Anthracite finish color and safety glass. Suitable for Building area, high bay, street or walkway lighting application. IP66, IK10
Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK0611-8W-15D

Recessed adjustable square downlight with snoot and luminaire body made of aluminium housing with white powder coated trim finish. Black finish and honeycomb accessory available upon request.

Compare
SIMES
INGROUND UPLIGHT
OUTDOOR LIGHTING
S.7016W
To-be-fixed supports and recessing box in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Toughened glass diffusor 15 mm thick for CONTINUOUS LINE FULL-GLASS. Extruded polycarbonate diffuser 3mm thick for CONTINUOUS LINE POLYCARBONATE. Luminaire hard wired with single neoprene cable with cable gland. Fixing bases and recessing box included. Fast connector IP67 included.
Compare
LUMASCAPE
WALLWASHER
OUTDOOR LIGHTING
Quadralux Q8 Spotlight_LS9180

The Quadralux Q8 is a very-high powered architectural-grade spotlight that combines technology and performance in a modern form factor. Packed with features including EasyGlow™ visual comfort, and CoolDrive™ thermal management technologies. PowerSync™ allows for highly granular digital control via common protocols. Unique and flexible mounting with glare control accessories enable installation in multiple orientations.

Compare
SPARK
RECESSED DOWNLIGHT
INDOOR LIGHTING
SPK8224-10W

 Recessed adjustable downlight, aluminium housing, different types of beam angle.

Compare
LINEALIGHT
WALLWASHER
OUTDOOR LIGHTING
81605W15
Single emission lines for outdoor application. The warm white LED light source with a wide flood light distribution is composed of 18 powerled LEDs. The device body is made of aluminium 6060 and features a anodised aluminum finish, processed by means of 20 µm anodizing; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP67; the total weight is of 4.8 kg. The power supply cable is include and features a 0.2 m length. The device features protection class I and can be wall lights or floormounted with an outer casing, code 98673(for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
LINEALIGHT
CEILING LIGHT
INDOOR LIGHTING
82606W07
Single emission ceiling lights for indoor application. The warm white LED light source with a asymmetric wallwasher light distribution is composed of 3 powerled LEDs. The device body is made of aluminium 6060 and features a embossed black ral 9005 finish, processed by means of powder coating; the diffuser is made of PC. The ingress protection degree is IP20; the total weight is of 0.5 kg. The total absorbed power is 10.5 W. The power supply cable is included and features a 0.170 m length. The device features protection class II and can be ceiling-mounted. Compliant with the EN 60598-1 standard and its specific provisions.
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset